Posted on Leave a comment

The Addiction Continues…Buying my own Spinning Wheel

After a fabulous trip to NY to visit friends in mid-November 2015 (See my first post on Spinning Addiction), I left with a newfound love for spinning yarn.
I had learned on her Ashford Traditional wheel, which was fantastic, and was then sent home with a large bag of wool that just begged to be spun.

The Ashford wheel on which I learnt to spin
The Ashford wheel on which I learnt to spin

Thus began my hunt for a spinning wheel to call my own.
I focused on used wheels in Ontario and began checking Kijiji and Craigslist on a daily basis.  New wheels were a little expensive for a brand new hobby that was still percolating and hadn’t yet established itself solidly in my life.
There were many wheels available but it was really difficult for a newbie like me to decide from a picture, usually grainy and discoloured, whether a certain wheel looked functional and worth my time.  It was even harder when a seller said “my wheel looks like the one in the picture” without sharing an *actual* picture of the wheel for sale.
So I did more research.  I read articles on spinning and wheel brands.  What type of problems were common with older wheels, what bits to check when in the presence of a used wheel, etc etc.
I really wanted an Ashford, as I had fallen in love with the wheel I learned on, so I did searches specifically for that brand but there were few to be seen in my price range.
One day, I saw a listing for what the seller said was a 10-year-old Ashford for $150.  The location was far but we were heading out of town for the Yule season so this person kindly offered to drive south and meet me along the highway outside a McDonalds.
When I saw the wheel, I had some concerns.
I knew right away that is was more than 10 years old.  What she had meant was that it had been 10 years since she had purchased it. The wheel was obviously much older.  The drive band was discoloured and the brake band was non-existent.
There was no Ashford stamp to be seen anywhere on the body of it and upon examination, I noticed that one of the plastic brackets meant to hold the flyer was snapped in half.
Upon using the treadle, the movement was smooth and easy.  The wheel had no warp to be seen and all the moving bits and pieces seemed to be in good condition, just aged.  This made sense as she told me it had been kept in a living room at a constant temperature rather than in a basement or attic where it likely would have sustained damage over time.
Due to the snapped bracket, the seller dropped the price to $100.  In the pictures I had seen, the bracket had been there so we both assumed it had broken during transit.
I hemmed and hawed….I had met her because I thought it was an Ashford but I didn’t see a stamp on it…I kind of had my heart set on an Ashford etc etc….she also felt horrible that there was a broken bracket and that miscommunication has taken place regarding the age of the wheel
Then B jumped in, tested all the bits and pieces again and made a good point.  “It seems to run fine and I’m sure we can replace the bracket.  For $100, it will make a good learning wheel for now.”
The seller was amazing.  She gave me her contact information to be in touch if I found I couldn’t fix the bracket.  She said to let her know and she would meet me again, reimburse the money and take the wheel back.
So, long story short….I bought the wheel and we continued on to Ottawa. Over our Christmas holidays, I took the wheel into two shops so that it could be examined by a couple of people who were more knowledgeable about wheels than I.
KnitKnackers in Smiths Falls, Ontario – It was on the way, so we stopped there right after buying the wheel.
Fabulous shop with amazing employees!  They are so warm and friendly, and the shop is so cozy…I love the fact that it is on our way to visit family and try and stop in whenever we pass through Smiths Falls.  The woman in the shop on the day I brought in the wheel did some research and although she couldn’t confirm it, she said she *thought* it was an Ashford.  She also checked it over and found all the pieces in great condition, told me that she felt I had found myself a great deal, and sold me the softest and most incredible cream coloured, organic merino wool roving!  (I highly recommend it!  I have tried many different fibres with my wheel and it is by far my favourite!)
Wabi-Sabi in Ottawa, Ontario – This is second place I took my wheel. They specialize in Ashford wheels and their accessories so this seemed to be the perfect place to take it.  They were incredibly helpful and the store is fantastic!  Lots of yarn and roving to choose from!
This turned out to be the best decision because we verified that yes indeed, my wheel was an Ashford.  It wasn’t 10 years old, more like 40 years old circa 1975, and it didn’t have a stamp, it seems that some older ones just don’t, but it was an Ashford and it was in really good condition 🙂
I pointed out the broken bracket and they just happened to have a box of extra brackets in-store!  Plus an Ashford accessory kit with new bands and all the extra little bits I may need to replace over time as I start spinning.
I was so excited!  By Christmas, I had a functioning spinning wheel and I haven’t looked back!!
And here she is!  Introducing….Maddy (Madeleine)!
Yep. I name things.
Introducing Madeleine (or Maddy for short) new spinning wheel!
Introducing Madeleine (or Maddy for short)….my new spinning wheel! Circa 1975 Ashford Traditional

Close up of Maddy and my newest bobbin
Close up of Maddy and my newest bobbin


Leave a Reply

Your email address will not be published. Required fields are marked *